Control range
- Temperature range from -40 to 150°C Humidity range from 20 to 95% RH
Performance
- Microprocessor PID control / Temperature calibration / Automatic tuning.
- Advanced performance of low and high temperature and humidity control, achieved by adapting the humidification tank exterior to the chamber, added benefit for long term test.
- Water recycling and filtering system reduce water consumption for longer operation.
- Air-tight door closure with perfect sealed packing.
- Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
- Two-point door latch also enhances tightness to door closure.
- Energy efficiency is achieved by optimization of the insulation system.
- Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 60℃.
Safety
- Built in door lock with a key.
- Automatic shut off after overheat alarm.
- Low and empty water level alarm.
- Power supply leakage breaker.
- Over current protection.
- Open door alarm.
Convenience
- SThree different volume sizes are available to suit any users’needs.
- Corrosion resistance stainless steel chamber and electric polished humidification tank.
- Maintenance of water supply are easily performed with a front water tank.
- Portable water container makes supplying water convenient.
- Water supply during operation is also available for long term test purposes.
- Direct water system provides user great convenience when performing long-term tests. (optional)
- Clear observation of samples.
- Tempered glass door with built in heating wire.
- Energy efficient, long life span LED lighting.
- Wider view, inner glass door is available for monitoring of samples. (optional)
- Cable port for introduction of external probes or wires.
- 50mm diameter cable port comes standard on the left side of the unit.
- Additional 50mm or 80mm diameter cable ports, custom ordered. (optional)
- Casters for easy mobility during installation or relocation.
- User friendly LCD controller.
- 5.7 inch colorful interactive touch type LCD controller.
- Set value and present value are clearly visible together on display.
- Operating progress visible in graph mode allow for direct data interpretation.
- Built-in SD card drive.
- Trilingual support. (English / Chinese / Korean)
- Temperature and other operating parameters recorded with use of selectable recorder. (optional)
- Sufficient programmable control support.
Description | No | |
Programmable pattern capacity | 120 | |
Pattern repeat time | 999 | |
Max. segments per a pattern | 100 | |
Available max. segments* | 1200 | |
Programmable process time per a segment | 0 to 999hr. 59 min. 59 sec. |
* Even though the max. segments per a pattern are 100, available total segments are up to 1200 not 12000, so you need to arrange the number of segment an patterns properly.
- Computer interface.
- RS-485 communication port enables connection of up to maximum 9 units. Simultaneous monitoring and operating of multiple units is an available feature. (optional)
- Program patterns are simple to set with the use of our software.
- Storage of program information, backup of value settings, recovery, temperature, humidity values.
- RS-232 communication port comes standard.
Models | TH-I-180 | TH-I-300 | TH-I-408 | |
Chamber volume (L / cu ft) | 189 / 7.4 | 302 / 11.9 | 408 / 14.4 | |
Controller | Programmable, Touch screen type controller (5.7” color monitor) | |||
Temperature | Range (°C / °F) | -40 to 150 / -40 to 302 without humidity, 15 to 90 / 59 to 194 with humidity * Best programmable control range : -30 to 140 / -22 to 284 |
||
Fluctuation 1) (±°C / °F) at 40°C / 75%RH | 0.3 / 0.54 | |||
Variation 1) (±°C / °F) at 40°C / 75%RH | 0.5 / 0.9 | |||
Time | Heating – without humidity (min.) |
70 from -40°C to 120°C (-40°F to 248°F) | ||
Cooling – without humidity (min.) |
75 from 20°C to -40°C (68°F to -40°F) | |||
Humidity | Range (%RH) | 20 to 95 ※ See Feature page for more detailed humidity range check. | ||
Fluctuation1)(±%RH)at 75%RH / 40°C | 0.4 | |||
Variation1)(±%RH) at 75%RH / 40°C | 3 | |||
Refrigeration | System | Mechanical single stage refrigerator system (air-cooled condenser) |
||
Refrigerant | R-507 | |||
Water Supply | Capacity | 15L (0.53cu ft) – Cartridge type | ||
Water quality | pH6.2 to 7.2 / Electrical conductivity 20㎲ /cm to below | |||
No. of wire shelves (standard / max.) | 2 / 9 | 2 / 10 | 2 / 10 | |
Distance of between shelves (mm / inch) | 40 / 1.6 | 40 / 1.6 | 40 / 1.6 | |
Max. load per shelf (kg / lbs) | 20 / 44.1 | 25 / 55.1 | 25 / 55.1 | |
Permitted total load (kg / lbs) | 50 / 110.2 | 65 / 143.3 | 65 / 143.3 | |
Dimension (W×D×H) | Interior (mm / inch) | 500×630×600/ 19.7×24.8×23.6 | 600×630×800/ 23.6×24.8×31.5 | 600×850×800/ 23.6×33.5×31.5 |
Exterior (mm / inch) | 1003×1139×1468/ 39.5×44.8×57.8 | 1103×1139×1668/ 43.4×44.8×65.7 | 1103×1359×1668/ 43.4×53.5×65.7 | |
Viewing windows (mm / inch) | 200×330 / 7.9×13 | |||
Net weight (kg / lbs) | 320 / 705.5 | 385 / 848.8 | 410 / 903.9 | |
Cable port | Basically one hole provided / Ø50mm (2”) – Optionally max. two holes available / Ø 50 or 80mm (2 or 3.2”) |
|||
Interface Port | Basically RS-232C [RS-485-optional] | |||
Electrical requirements (230V, 60Hz) | 1ph / 26.3A | 1ph / 26.7A | ||
Cat. No. | AAH80111K | AAH80121K | AAH80131K | |
Electrical requirements (230V, 50Hz) | 1ph / 26.3A | 1ph / 26.7A | ||
Cat. No. | AAH80113K | AAH80123K | AAH80133K | |
Electrical requirements (380V, 50Hz) | 3ph / 9.1A | 3ph / 9.2A | ||
Cat. No. | AAH80118K | AAH80128K | AAH80138K |